|
| ||
|
F150 Tranny
Newps You can get one of 2 5 speed transmissions for that truck. Either a Mazda M5OD-R1 out of another F150. they were a stock option in the 88-96 F150's with the 6cyl and the 302. should be a pretty much bolt in affair. however they were a hydraulic clutch. not sure if that 85 is hydraulic or linkage. i think 83-84 they switched to the hydraulic but not sure. the other tranny you could use is the heavy duty ZF-5 spd. these were in the F250-350 trucks usually behind the 460-diesels. some did manage to make it into the heavy GVW F150's but are hard to find and are super expensive when you do. i have seen useable cores for these go on ebay for around $400-600 with rebuilds running around $900-$1200 If your not hauling and towing a whole lot the mazda 5spd will be fine. they are everywhere and are dirt cheap usually. check out www.novak-adapt.com for some good tranny identification info. 1988 Ford F150, 4.9L I6 300 4x4 kraker13 the engine will bolt the transmission just do some checking. you will probably have to get a flexplate-flywheel for the... Jason
|
||||||||